|
SF-14 齿轮泵专用轴承 Gear
pump bearing
|
应用特点：该产品是在SF-10材料的基础上，根据齿轮油泵的高PV值特定工艺条件而设计的产品，产品主要应用于齿轮油泵，叶片油泵等。
Application characteristics：It's a new kind of SF-10
which composes of a specially designed surface layer
of PTFE formulations and is specifically applied
for the high PV value of gear pump bearing. It's
used in gear pumps, vane pumps, etc.
可供标准产品：直套P3、P7，翻边轴套P5、P9，止推垫片P6、P10，板材P6。
Provide standardized products：Cylindrical bushes
P3、P7, flanged bushes P5、P9,thrust washers P6、P10,
Flat strip material P6.
可供非标产品：直套，翻边轴套，止推垫片，板材，轴瓦，滑板，钢套组合件。Provide non-standardized
products：Cylindrical bushes, flanged bushes, thrust
washers, flat strip material, half Bearing, wear
plate, SF-14 with steel bush.
|
SF-15 往复运动轴承 Reciprocating
motion bearing
|
应用特点：该产品是在SF-10材料的基础上，根据往复运动的特殊工艺条件而设计的产品，产品主要应用于汽车、摩托车减震器、液压油缸，汽缸等。
Application characteristics：It's nes kind of SF-10
which is composed of a specially designed product
according to it's reciprocating motion workmanship
condition. It's used in shock absorber of automobiles
& motorcycles, hydraulic and pneumatic cylinder.
可供标准产品：直套P3、P6，翻边轴套P5、P9，止推垫片P6、P10，板材P6。
Provide standardized products：Cylindrical bushes
P3、P7，flanged bushes P5、P9,thrust washers P6、P10,
Flat strip material P6.
可供非标产品：直套，翻边轴套，止推垫片，板材，轴瓦，滑板，钢套组合件。
Provide non-standardized products：Cylindrical
bushes, flanged bushes, thrust washers, flat strip
material, half Bearing, wear plate, SF-15 with
steel bush.
|
SF-16 液压专用轴承 Hydraulic
pressure bearing
|
应用特点：该产品是在SF-15的基础上结合油缺及减震器工作原理而设计的一种新型材料，其性能与国外DP4相似，该产品除具有SF-15的优点外，特别适用于往复频率的大侧向力场合，目前该产品逐步替代SF-15产品适用于汽车、摩托车减震器以及各种液压缸等领域。Application
characteristics：SF-16 hydraulic bushing is developed
on the basis of SF-15 and meanwhile considering
the motion way of oil pump and damper. It is the
substitute of and parallels in performance with
abroad DP4.In addition to covering the same usage
of SF-15, SF-16 in particular fits frequently reciprocating
motion with a high side force. It is a tendency
to gradually replace SF-15 with SF-16, the latter
will cover a wide application in automobile, motor
damper and oil pumps etc.
可供标准产品：直套P3、P7，翻边轴套P5、P9，止推垫片P6、P10，板材P6。
Provide standardized products：Cylindrical bushes
P3、P7，flanged bushes P5、P9，thrust washers P6、P10，Flat
strip material P6.
可供非标产品：直套，翻边轴套，止推垫片，板材，轴瓦，滑板，钢套组合件。
Provide non-standardized products：Cylindrical
bushes, flanged bushes, thrust washers, flat strip
material, half Bearing, wear palte, SF-16 with
steel bush.
|
|
